24 volt 2000 Series LED Pilot Lightbar. Magenta and amber suitable for both class 1 and 2. Complete with control head switching. Bright even in broad daylight

A 5-way relay

An "AHEAD" sign for use with other signs to place over the top of "FOLLOWS" when piloting loads behind the convoy.

Size is 960mm by 180mm

On 2mm aluminium base with retroreflective material suitable for day and night use.

An overall guide to the safe relocation to shifting buildings in NZ.

Ring bound A4 document.

Anytone CB Radio

A High Performance Mid-Sized Truckies CB Radio

Manual volume and squelch controls with additional automatic squelch function

2 colour LCD display

40 channels AM/FM

Automatic scanning select switch

Antenna included with mount and bracket with 5m coax cable fitted with small easy run terminals, mounting bracket and hard ware

Link to Specification Sheet

Price includes GST and Freight Nationwide

This is a set of two hazard panels for use on an overdimension load.

Contains a left handed and right handed sign.

In class 1 retroreflective materials on a 2mm aluminium base suitable for day and night use.

Each sign is 400mm wide and 300mm high to meet the requirements in the VDAM Rule.

A short Code of Practice to describe the requirements for traffic control when bridge are being crossed by an load on an overweight permit. A section with 60 questions tests the applicants knowledge.

Pilot Vehicle Sign: Danger Slow Down" on front and "Pilot Vehicle" on reverse. Complies with VDAM Rule requirements.

1100mm wide and 600 mm high

In retroreflective material for day and night use applied to an aluminium base.

A updated four-page guide for the 2016 Dimension & Mass Rule. This Guide is on laminated card with each of the four load categories are described with their required conditions for each.

This third edition includes specially commissioned maps for the changes in the 2016 Rule for Cat 4 loads.

This price includes GST and Postal Delivery

One baton with dual colour: Red LEDS x 6, and Green LEDS x 6
Batteries 3 x C cell (not included)
Dimensions 260mm x 40mm (picture shows longer 540mm baton, now unavailable)
Functions:

- Red or Green on steady
- Red /Green alternate flash
- White Torch

Price includes GST and Freight Nationwide

This First Aid Kit contains all the items recommended for Workplace First Aid Kits in the “First Aid for Workplaces – A Good Practice Guide” published by Worksafe NZ. Extra items have been added such as an instant ice pack & Digital Thermometer.

Contents:

Heavy Duty Waterproof Bag with internal pockets (measures 240mm x 180mm x 85mm.)
FREE Digital Thermometer
FREE instant ice pack
2 x Emergency Blankets
1 x CPR Resuscitation mask with valve
1 x Eye Pad 5.5cm x 7.5cm
2 x Burns Dressings 20cm x 30cm
2 x Conforming Bandage Rolls 6cm x 400cm
2 x Conforming Bandage Rolls 8cm x 400cm
20 x Band Aid strips 7.5cm x 2cm
2 x Triangular Bandages 90cm x 90cm x 127cm
Long adhesive strip 6cm x 20cm
Adhesive Multi-pore Tape Roll 13mm x 5m
3 x Butterfly Adhesive Plasters 7.4cm x 4.5cm
2 x Knuckle Adhesive Plasters 7.5cm x 3.7cm
4 x Semi-permeable Dressings 6cm x 7cm
3 x Adhesive Island Dressings 6cm x 7cm
2 x Adhesive Island Dressings 6cm x 10cm
Combined/Abdominal absorbent pad 23cm x 12.5cm
Scissors 15cm
Tweezers (metal)
4 pairs large PVC safety gloves
10 x safety pins
4 x Soap wipes 20cm x 19cm
4 x Saline Cleansing Wipes 20cm x 19cm
First Aid Guide

NOTE: Price includes GST and Delivery

This Senshin height measuring pole extends to a height of 6m. Made of fibreglass, it's readout device is located at ground level.